Config macfilter adddest, Config macfilter deldest, Spanning tree commands – NETGEAR 7200 Series Layer 2 Managed Switch Software User Manual
Page 87: Config macfilter adddest -45, Config macfilter deldest -45, Spanning tree commands -45
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
7-45
202-10010-01
If all is selected, all ports will be removed from the source port filter set.
Format
config macfilter delsrc <macaddr> <vlan>
<slot.port|all>
config macfilter adddest
This command adds the <slot.port> to the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the destination port to be added to the destination port filter
set for the MAC filter.
If all is selected, all ports will be added to the destination port filter set.
Format
config macfilter adddest <macaddr> <vlan>
<slot.port|all>
config macfilter deldest
This command removes a port from the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the destination port to be removed from the destination port
filter set for the MAC filter.
If all is selected, all ports will be removed from the destination port filter set.
Format
config macfilter deldest <macaddr> <vlan>
<slot.port|all>
Spanning Tree Commands
This section provides detailed explanation of the spanning tree commands. The commands are
divided into two functional groups: