National Instruments Fieldpoint CFP-2220 User Manual

National Instruments Hardware

Advertising

This manual is related to the following products:

Fieldpoint CFP-2200 Fieldpoint CFP-2210

Table of contents

Document Outline

cFP-2200/2210/2220 Operating Instructions and Specifications
- Figure 1. cFP-22xx, Front and Bottom Views
What You Need to Install the cFP-22xx
Mounting the Compact FieldPoint Backplane
- Figure 2. cFP-22xx Installed on cFP-BP-4 Mounted Upright
- Figure 3. cFP-22xx Installed on cFP-BP-x, Bottom View with Dimensions
- Figure 4. cFP-22xx Installed on cFP-BP-4, Front View with Dimensions
- Figure 5. cFP-BP-8, Back View with Dimensions
- Figure 6. cFP-BP-4, Back View with Dimensions
- Mounting the Backplane on a DIN Rail
  - Figure 7. Installing the DIN Rail Clip on the cFP-BP-4
  - Figure 8. One Edge of DIN Rail Inserted in Clip
- Mounting the Backplane on a Panel
- Mounting the Backplane in a Standard 19 in. Rack
Installing the cFP-22xx on the Backplane
- Figure 19. Installing the Controller on the Backplane
Installing I/O Modules on the Backplane
- Figure 20. Installing an I/O Module on the Backplane
Installing Connector Blocks on the Backplane
- Figure 21. Installing a Connector Block on the Backplane
Connecting the cFP-22xx to a Network
- Using Ethernet Port 2 to Connect the cFP-2220 to Other FieldPoint Systems on the Network
Wiring Power to the cFP-22xx
- Figure 22. Wrapping the Power Wires around the Ferrite
- Figure 23. Closed Ferrite
- Figure 24. Ferrite Installed with Tie Wrap
Powering On the cFP-22xx
Connecting Serial Devices to the cFP-22xx
- COM 1
  - Figure 25. Controller Serial Port
  - Table 1. DB-9 Pin Descriptions
- COM 2 (cFP-2210 and cFP-2220 Only)
- COM 3 (cFP-2220 Only)
- COM 4 (cFP-2220 Only)
External Digital Inputs and Outputs (cFP 2220 Only)
- Figure 28. Wiring the cFP-2220 External Input and Output Terminals
Connecting USB Mass-Storage Devices to the cFP-2220
Using the Internal Real-Time Clock
Configuring DIP Switches
- Figure 29. DIP Switches
- IP RESET Switch
- SAFE MODE Switch
- NO APP Switch
- CONS OUT Switch
- USER2 and USER1 Switches
Using the Reset Button
Understanding LED Indications
- Figure 30. LEDs
- STATUS LED
  - Table 3. Status LED Indications
- POWER LED
- User-Configurable LEDs
Removable CompactFlash (cFP-2220 Only)
File Transfer Capability
Remote Front Panels
Resetting the Network Configuration of the cFP-22xx
Troubleshooting
- Runaway Startup Application
- Other Indications of Trouble with the Controller
  - Reformatting the Internal Memory
Specifications
- Network
- Memory
- Serial Ports
- USB Port (cFP-2220 Only)
- Power Requirements
- Physical Characteristics
- Safety Voltages
- Safety Standards
- Electromagnetic Compatibility
- CE Compliance
- Environmental Management
- Environmental
- Shock and Vibration
- Special Conditions for Marine Applications
- Cabling
  - Table 4. Ethernet Cable Wiring Connections
  - Figure 31. Ethernet Connector Pinout
Where to Go for Support