NISSAN 2009 Quest User Manual

Page 141

Advertising
background image

Power Assist:
If the main on/off switch is ON and a sliding door
is unlocked and manually moved toward the open
or closed position using the inside or outside
handle, the power assist feature will be activated
and the door will complete its motion automati-
cally.

Power Open:
The door automatically moves from the fully
closed position to the fully open position in ap-
proximately three to six seconds. The power open
feature can be activated by the switches on the
keyfob, the overhead console and the door pillar.

● A sliding door can be opened by the over-

head console switch and the keyfob even if
the vehicle is locked. The door will individu-
ally unlock and open. When the sliding door
is closed, it will remain unlocked. The vehicle
must be re-locked to lock the door.

● The keyfob button must be held for 0.5 sec-

onds before the door opens.

● The switch on the door pillar can only be

used to open the door if the main ON/OFF
switch is ON, the door is unlocked and the
child lockout switch is not set.

A warning chime will sound if the shift selector is
moved out of P (Park) during a power open
operation.

The driver’s side power sliding door cannot be
power opened when the fuel lid door is open. A
warning chime will sound if an open operation is
attempted. The door can be opened manually
part way.

Power Close:
The door automatically moves from the fully open
position to the secondary position. When the
sliding door reaches the secondary position, the
cinching motor engages and pulls the door to its
primary latch position. Power close takes ap-
proximately four to seven seconds. The power

close feature can be activated by the switches on
the keyfob, the overhead console and the door
pillar.

● If the inside or outside handle is activated

while the cinching motor is engaged, the
cinching motor will disengage and release
the latch.

● The keyfob button must be held for 0.5 sec-

onds before the door closes.

● The switch on the door pillar can only be

used to close the door if the main ON/OFF
switch is ON.

Reverse:
The door will reverse direction immediately dur-
ing power open or power close if the keyfob,
overhead console or door pillar switch is
pressed. A chime will sound to announce the
reversal.

Auto Reverse:
If an obstacle is detected during power open or
power close, a warning chime will sound and the
door will reverse direction and return to the full
open or full close position. If a second obstacle is
detected, the door motion will stop and the clutch
mode will be engaged.

Overhead console switch

WPD0335

Pre-driving checks and adjustments

3-7

REVIEW COPY—

2009 Quest (van)

Owners Manual—USA_English (nna)
07/17/08—debbie

Advertising