How to use the setting button -23 – NISSAN 2009 Quest User Manual

Page 187

Advertising
background image

Tire pressure rises and falls depending on the
heat caused by the vehicle’s operation and the
outside temperature.

In case of low tire pressure, a message is dis-
played on the screen:

LOW PRESSURE — Check All Tires.

WARNING

When a spare tire is mounted or a wheel

is replaced, tire pressure will not be
indicated, the Tire Pressure Monitoring
System (TPMS) will not function and
the low tire pressure warning light will
flash for approximately 1 minute. The
light will remain on after 1 minute. Con-
tact your NISSAN dealer as soon as
possible for tire replacement and/or
system resetting.

Replacing tires with those not originally

specified by NISSAN could affect the
proper operation of the TPMS.

HOW TO USE THE SETTING
BUTTON

When the SETTING button is pressed, the SET-
TINGS screen will appear on the display. You can
select and/or adjust several functions, features
and modes that are available for your vehicle.
Move the joystick and press the ENTER button to
select each item to be set.

Display settings

Select the “Display” key and press the ENTER
button. The DISPLAY SETTINGS screen will ap-
pear.

LHA0558

WHA0715

Display screen, heater, air conditioner, audio and phone systems

4-23

REVIEW COPY—

2009 Quest (van)

Owners Manual—USA_English (nna)
07/17/08—debbie

Advertising