Steering wheel -21, Tilt operation -21, Pedal position adjustment (if so equipped) -21 – NISSAN 2009 Quest User Manual

Page 155

Advertising
background image

CAUTION

If fuel is spilled on the vehicle body,

flush it away with water to avoid paint
damage.

Insert the fuel-filler cap straight into the

fuel-filler tube, then tighten until the
fuel-filler cap clicks. Failure to tighten
the fuel-filler cap properly may cause

the

Malfunction Indicator Light

(MIL) to illuminate. If the

light

illuminates because the fuel-filler cap
is loose or missing, tighten or install the
cap and continue to drive the vehicle.

The

light should turn off after a

few driving trips. If the

light

does not turn off after a few driving
trips, have the vehicle inspected by a
NISSAN dealer

For additional information, see the

“Malfunction Indicator Light (MIL)” in
the “Instruments and Controls” section
earlier in this manual.

TILT OPERATION

Pull the lock lever forward and adjust the steering
wheel up or down to the desired position.

Push the lock lever back to lock the steering
wheel in place.

WARNING

Do not adjust the steering wheel while
driving. You could lose control of your
vehicle and cause an accident.

The accelerator and brake pedals can be ad-
justed for driving comfort.

Use the pedal adjusting switch to adjust the
brake and accelerator pedal position forward

1

or backward

2

.

The brake and accelerator pedals cannot be ad-
justed separately.

WARNING

Do not adjust the pedal position while
driving. You can lose control of your ve-
hicle and cause an accident.

WPD0342

WPD0357

STEERING WHEEL

PEDAL POSITION ADJUSTMENT (if so
equipped)

Pre-driving checks and adjustments

3-21

REVIEW COPY—

2009 Quest (van)

Owners Manual—USA_English (nna)
07/17/08—debbie

Advertising