NISSAN 2009 Quest User Manual

Page 184

Advertising
background image

● Average Speed - Average speed driven

(MPH or km/h) since the last reset.

Resetting trip 1 and trip 2

Each trip screen can be reset to 0. Press the TRIP
button to select the TRIP screen to be reset.

● Select the “Reset” key on screen by press-

ing the ENTER button, or

● Press the TRIP button for more than approxi-

mately 1.5 seconds.

Fuel economy

Press the TRIP button to display Average Fuel
Economy and Distance To Empty.

Average fuel economy (MPG or L/100 km)

The Average Fuel Economy is calculated based
on fuel consumption since the last reset. The
display is updated every 30 seconds and 1/3
mile (500 m). After a reset or connecting the
battery cables, the display will show (**.*).

Resetting fuel economy

The average fuel economy calculation can be
reset to 0. Press the TRIP button repeatedly until
the FUEL ECONOMY menu is shown, then ei-
ther:

● Select the “Reset” key on screen by press-

ing the ENTER button, or

● Press the TRIP button for more than approxi-

mately 1.5 seconds.

Distance to empty (MI or km)

The Distance To Empty (DTE) mode provides you
with an estimation of the distance that can be
driven before refueling. The DTE is constantly
calculated based on the amount of fuel in the fuel
tank and the actual fuel consumption. The display
is updated every 30 seconds. When the fuel level
is low, the DTE display will change to (*).

NOTE:

● If the amount of fuel added while the ignition

switch is OFF is small, the display just before
the ignition switch is turned OFF may con-
tinue to be displayed.

● When driving uphill or rounding curves, the

fuel in the tank shifts, which may momentarily
change the display.

LHA0553

4-20

Display screen, heater, air conditioner, audio and phone systems

REVIEW COPY—

2009 Quest (van)

Owners Manual—USA_English (nna)
07/17/08—debbie

Advertising