Safety, Electromagnetic compatibility, Ce compliance – National Instruments Fieldbus User Manual
Page 27
Appendix C
Specifications
C-2
ni.com
Safety
This product is designed to meet the requirements of the following
standards for safety and electrical equipment for measurement, control, and
laboratory use:
•
IEC 60950, EN 60950
•
UL 1950, UL 60950
•
CAN/CSA C22.2 No. 60950
Note
For UL and other safety certifications, refer to the product label or to
ni.com
.
Electromagnetic Compatibility
Emissions................................................EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity ................................................EN 61326-1:1997/ +A2:2001,
Table 1
CE, C-Tick and FCC Part 15 (Class A) Compliant
Note
For EMC compliance, operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, click Declarations
of Conformity Information at
ni.com/hardref.nsf/
.