NETGEAR KWGR614 - Manual (Page 19)

Wireless Configuration 2-1
v1.2, September 2006
Chapter 2
Wireless Configuration
This chapter describes how to configure the wireless features of your 54Mpbs Wireless Router. In
planning your wireless network, you should consider the level of security required. You should
also select the physical placement of your wireless router in order to maximize the network speed.
For further information on wireless networking, see
“Wireless Communications” in Appendix B .
Observing Performance, Placement, and Range Guidelines
The operating distance or range of your wireless connection can vary significantly based on the
physical placement of the wireless router. The latency, data throughput performance, and notebook
power consumption of wireless adapters also vary depending on your configuration choices.
For best results, place your wireless router as follows:
• Near the center of the area in which your computers operates.
• In an elevated location such as a high shelf where the wirelessly connected computers have
line-of-sight access (even if through walls).
• Away from sources of interference, such as computers, microwaves, and 2.4 GHz cordless
phones.
• Away from large metal surfaces.
The time it takes to establish a wireless connection can vary depending on both your security
settings and placement. Wired Equivalent Privacy (WEP) connections can take slightly longer to
establish. Also, WEP and Wi-Fi Protected Access, Pre-Shared Key (WPA-PSK and WPA2-PSK)
encryption can consume more battery power on a notebook computer.
When used on a metallic surface, Multiple Input, Multiple Output ( MIMO) units must be
oriented vertically to ensure proper operation:
Note: Failure to follow these guidelines can result in significant performance degradation
or inability to wirelessly connect to the router. For complete range and
performance specifications, please see
Appendix A, “Technical Specifications” .