NETGEAR KWGR614 User Manual
Page 34
54Mbps Wireless Router Model KWGR614 Reference Manual
2-16
Wireless Configuration
v1.2, September 2006
4. Select the Turn Access Control On check box.
5. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup dialog displays.
6. In the Available Wireless Cards list, either select from the list of available wireless cards the
KWGR614 wireless router has found in your area, or enter the MAC address and device name
for a device you plan to use. You can usually find the MAC address printed on the wireless
adapter.
7. Click Add to add this wireless device to the Wireless Card Access List. The screen changes
back to the list screen.
8. Repeat
for each additional device you wish to add to the list.
9. Be sure to click Apply to save your Wireless Card Access List settings.
Now, only devices on this list will be allowed to wirelessly connect to the wireless router.
Figure 2-8
Note: You can copy and paste the MAC addresses from the router’s Attached Devices
menu into the MAC Address box of this menu. To do this, configure each
wireless computer to obtain a wireless link to the wireless router. The
computer should then appear in the Attached Devices menu.