Viewing a list of attached devices, Viewing a list of attached devices -9 – NETGEAR KWGR614 User Manual
Page 53
54Mbps Wireless Router Model KWGR614 Reference Manual
Maintenance
4-9
v1.2, September 2006
Viewing a List of Attached Devices
The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
For each device, the table shows the IP address, Device Name (if available), and Ethernet MAC
address. To force the router to look for attached devices, click the Refresh button.
Tx B/s
The current transmission (outbound) bandwidth used on the LAN ports.
Rx B/s
The current reception (inbound) bandwidth used on the LAN ports.
Up Time
The time elapsed since this port acquired the link.
Poll Interval
Specifies the intervals at which the statistics are updated in this window. Click on Stop
to freeze the display.
Set Interval
Enter a time and click the button to set the polling frequency.
Stop
Click the Stop button to freeze the polling information.
Figure 4-6
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.
Table 4-3:
Router Statistics Items
Item
Description