NETGEAR KWGR614 User Manual
Page 48
54Mbps Wireless Router Model KWGR614 Reference Manual
4-4
Maintenance
v1.2, September 2006
5. If your Internet connection does require a login, fill in the settings according to the instructions
below. Select Yes if you normally must launch a login program such as Enternet or WinPOET
in order to access the Internet.
a. Select the protocol used by your ISP from the “Internet Service Provider” drop-down list.
b. The screen will change according to the ISP settings requirements of the ISP you select.
c.
Fill in the parameters for your Internet service provider.
d. Click Apply to save your settings. Click the Test button to verify you have Internet access.
Note: After you finish setting up your router, you will no longer need to launch the
ISP’s login program on your computer in order to access the Internet. When
you start an Internet application, your router will automatically log you in.
Figure 4-2
Note: Not all ISP protocols are listed here. The ones on this list have special
requirements.