Napco Security Technologies F-TPG - Manual (Page 10)

10
E X I T I N G W I T H T H E S Y S T E M AL R E AD Y AR M E D
1 Press the STAY button on the Touchpad.
The ARMED indicator will light and STAY will begin to flash, indicating that you have up to 3
minutes to exit through the garage and close the door.
2 Open the garage door from the inside. System will disarm.
3 Exit the garage.
If the system is Armed STAY and you are leaving with other family members remaining home:
4 Close the garage door from the outside to arm the system (either by pressing A1 or A2 on your
Keyfob or with your existing garage door opener remote control).
If the garage door has not been closed within 3 minutes of pressing STAY , the system will
revert back to a disarmed state.
(Note: See page 13 if your garage door motor fails).
ARMED
STAY
F-TPG_OI309.06_USER_anch...
page 10
Friday, October 28, 2005 15:16
Composite