NordicTrack NTB49030 - Manual (Page 7)

7
4. Identify the Right and Left Uprights (5, 85) by the
location of the numbers and the high side of the
Upright.
Orient the Right Upright (5) as shown and attach
it to the Right Stabilizer (6) with the two M10 x
118mm Carriage Bolts (72) and two M10 Nylon
Locknuts (62).
Do not tighten the Locknuts yet.
Attach the Left Upright (85) to the Left
Stabilizer (not shown) in the same manner.
5. Slide two Weight Stops (36) onto the Weight
Carriage (12).
Slide the Carriage Stop (13) and the Weight
Carriage (12) onto the Rear Upright (4) as shown.
6. Pull the Pop Pin (61) out as far as it will go and
slide the Safety Spotter (11) onto the Rear
Upright (4). Engage the Pop Pin into an adjust-
ment hole in the Upright.
4
5
85
Numbers
High
Side
High
Side
Numbers
5
12
36
13
4
36
6
61
11
4
Adjustment
Hole
62
62
6
72