NordicTrack ELITE NTL19007.1 - Manual (Page 8)

8
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
Remove the tie from the Upright Wire Harness
(75).
Connect the Upright Wire Harness (75) to the
Console Wire Harness (71).
See the inset draw-
ing. The connectors should slide together
easily and snap into place. If they do not, turn
one connector and try again.
IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON. 71
Console
Assembly
4
75
Tie
74
5. Connect the TV Cable (49) and the AV Wire
(97) to the cables extending from the console
assembly. Then, insert the connectors down into
the Uprights (73, 74).
Next, insert the brackets on the Handrails (99)
into the Uprights (73, 74).
Make sure that no
wires are pinched.
49
73
97
5
74
99
6. Finger tighten three Handrail Bolts (64) with
three Upright Star Washers (90) into the Right
Upright (74). Next, finger tighten three Handrail
Bolts with three Upright Star Washers (not
shown) into the Left Upright (73). Then, firmly
tighten the six Handrail Bolts.
73
74
64
64
90
90
75
6
73
99
71
Console
Assembly