NDC comm CompuFax - Manual (Page 46)

2 2
lost whenever CompuFax is restarted. Operator privilege is required to make use of the FAX SET PRINTER
command.
5.3.2 Verifying Print er Opt ions
The new SHOW PRINTER command shows the current settings for the fax printer. This is a useful
command to verify that the printer is set up correctly.
A sample display is shown here:
FAX> SHOW PRIN TER
CompuFax print queue name: SYS$FAX
Printer Type and Model: PCL 3
Print resolution (dpi): 300
Paper size: LETTER
N umber of copies: 1
Form number: 0
Print sent faxes? N o
Print received faxes? N o
Delete rcd after print? Yes
Scale the printed fax? Yes
Compress best method? Yes
Manual sheet feed? N o
Print landscaped? N o
Print burst page? N o
Print flag page? N o
Print trailer page? N o
N otify when printed? Yes
Flag page note: *** CompuFax Version 3.2 ***
FAX>
5.3.3 The PRINT Com m and
Instead of printing automatically, fax files may be printed later, using the CompuFax PRINT command.
For example:
FAX> PRIN T FAX$:REC_DIR:RAC1B9E6_1_8182485253.T4 / DELETE
5.4 View ing Faxes
Instead of printing every received fax, the CompuFax VIEW command may be used to view a received fax or
other T4 file. However, since T4 files are graphics files, they cannot be displayed on terminals that are only
capable of displaying text.
For the VIEW command to work, you need a VT330 or similar terminal, capable of displaying sixel graphics.
Also, Operator privilege is required to use the viewing facility. The command file CF_REC_TOOLS.COM
has been provided as a customizable tool, to facilitate the viewing of T4 files and then print, delete, move, or
otherwise dispose of them.