NDC comm CompuFax - Manual (Page 72)

4 8
/ N ORECEIVE / RESOLUTION
/ SPEED / SPEED2
In order to use the following qualifiers the device must be taken off line
(STOP/ DEVICE) first:
/ CLASS / CSI
/ DEVICE_TYPE / IN ITIALIZATION _STRIN G
/ RECEIVE / N ORECEIVE
/ SPEED / SPEED2
SET JOURN AL
Description:
This command may be used to modify the current journal file settings. OPER privilege is
required. The record layout is defined by $FAX$DIR:FAX_JOURNAL.H. Modifications made with the SET
JOURNAL command last only until the system is restarted. To make permanent modifications the options
file FAX$OPTIONS must be modified. See HELP SERVER_OPTIONS JOURNAL.
/ ALL
Description:
This qualifier causes all send attempts to make journal file entries. This qualifier reverses the
effect of the / COMPLETIONS_ONLY qualifier.
/ COMPLETION S_ON LY
Description:
If this qualifier is specified, only completions will be entered in the journal. Completions
include failures for which all retries have been exhausted. Faxes which will be retried will not generate journal
records. The / ALL qualifier will reverse the effect of this qualifier.
/ DISABLE
Description:
This qualifier disables the journal file. This disabling is temporary until either a SET
JOURNAL/ ENABLE command is issued or until the server is restarted.
/ EN ABLE
Description:
Re-enables the journal file after it has been disabled either through the server options file or
SET JOURNAL/ DISABLE.
/ N EW
Description:
This qualifier is used to create a new version of the journal file. This would normally be
done periodically to prevent the journal file from becoming too large and cumbersome.
SET ORIEN TATION
Format:
SET ORIENTATION / DEFAULT = PORTRAIT
SET ORIENTATION / DEFAULT = LANDSCAPE
Description: This command sets the default orientation for FAXes which are sent without either the
/ LANDSCAPE or / PORTRAIT qualifiers. OPER privilege is required to execute this command.
Modifications made with SET ORIENTATION last only until the system is restarted. To make permanent
modifications the server options file must be changed using the ORIENTATION command. The current
default orientation is displayed by both the FAX SHOW DEVICE/ FULL and FAX SHOW
CONVERSION commands while the system is running. The default orientation can be overridden on a per-
FAX basis with the / PORTRAIT and / LANDSCAPE qualifiers to the SEND command, or with the
# # LANDSCAPE or # # PORTRAIT file directive within a Printer Format file.
SET PRIN TER
Format:
SET PRINTER
Description: This command changes the setup of the fax printer, which may be used to print received
and/ or sent fax files. This printer must be capable of printing bitmapped images. Currently, only PCL (Printer