NDC comm CompuFax - Manual (Page 75)

5 1
/ SIZE
Format:
/ SIZE= LETTER (D)
/ SIZE= LEGAL
/ SIZE= A4
/ SIZE= EXECUTIVE
Description: This qualifier determines the maximum dimensions of a printed image. A quarter inch
border is required by the printer, which leaves a printable area of 8" x 10.5" for letter size paper, 8" x 13.5" for
legal size, about 197 mm x 284 mm for A4 size and 6.75" x 9.75" for executive size.
/ TRAILER
Format:
/ TRAILER
/ NOTRAILER (D)
Description: Determines whether a trailer page is printed after the file has been printed.
SHOW
Format:
SHOW CONVERSION
SHOW DEVICE
SHOW ENTRY
SHOW PRINTER
SHOW QUEUE
SHOW SERVER
SHOW CONVERSION
Format: SHOW CONVERSION
Description: This command displays the current settings for the conversion process and whether or not
conversion is enabled on the system.
SHOW DEVICE
Format:
SHOW DEVICE [= (n, ...)]
Description: This command displays the status of one or all fax devices. If no value is specified, the status
of all fax devices is shown. Otherwise, the specified devices are shown.
/ FULL
Description:
Enables the long display of additional information about each device.
/ OUTPUT
Format:
/ OUTPUT= filespec
Description: This is used to redirect the output of the SHOW command to a file. If this qualifier is not
present, the output is displayed on the screen. If a log file is already open, it will be closed first. The
LOG_OUTPUT command can also be used to open a log file.
SHOW EN TRY
Format:
SHOW ENTRY [qualifiers]
Description: This is used to show the status of pending queue entries. SHOW QUEUE and SHOW
ENTRY are synonyms and their function is identical.
/ ALL
Format:
/ ALL
/ NOALL (D)
Description: If this qualifier is present, all queue entries are shown. Otherwise, only those queued from
the present username are shown. / ALL will be overridden if the / USERNAME qualifier appears on the
command.
/ CON VERSION