Napco Security Technologies XP-400 - Manual (Page 21)

21
7 Full Set System
Program a 7 in the AUX 1 and/or AUX 2
option to Fully Set the System when the
K
and the M or N buttons on the Keyfob
are pressed, or when the M or N
buttons are pressed when the system is
armed with Exit/Entry Follower Zones or
Home/Away with Delay Zones that have
been bypassed.
8 Interior
Program an 8 in the AUX 1 and/or AUX 2
option to Bypass Exit/Entry Follower Zones
or Home/Away with Delay Zones when the
M or N buttons on the Keyfob are
pressed (only if the system is programmed
exclusively for Home/Away with Delay
Zones).
Downloading
[90]Callback Telephone Number
Program the phone number of the
downloading computer to be dialed by the
panel during a high security download.
[91]Ring Count
Program the number of rings before the
panel will pickup. Ring Method [92-1]
(Downloading Features) must also be
selected.
[92]Downloading Features
(1) Ring Method - Enable the ring method
of downloading. The panel will pick-up on
the number of rings programmed in Ring
Count [91].
(2) Answering Machine Override - Using
the downloading computer, call the panel.
When the operator has determined that the
panel has received 1-2 rings, pressing the
u key will cause the downloading
computer to immediately re-dial the panel.
The panel will pick-up on the first ring.
(3) Function 6 Download - Select to enable
the
A 6 method of downloading (pg. 8).
(4) Reserved.
[93]Auto Download ID Number
Enter the Number that is used by PCPreset
when downloading using Site Initiated Auto
Downloading (
A 6 ).
The requirements for Site Initiated Auto
Downloading are as follows:
1. Download Computer running PCPreset.
2. Program the telephone number of the
Download Computer in location [90]
Callback Telephone Number.
3. Program location [93] with the number
of the PCPreset account that is to be
downloaded.
PCPreset
1. Create the XP-400 account to be
d o w n l o a d e d u s i n g P C D 3 0 0 0
Quickloader Software.
2. Create a List using PCPreset.
3. Select the account by pressing
tt .
Select the desired account from the list
of PCD3000 accounts available. (The
location in the list is the Auto Download
ID Number [93])
4. Tag the list by entering aD
( download)
5. Enter Standby Mode by entering o .
The Computer is now in STANDBY