NetComm NCT240 - Manual (Page 11)

NetComm NCT240 Installation Guide Release 1.0
Installing Optional Modules
Before mounting the switch, be sure you install any optional modules. If you have purchased an
optional slide-in 1000BASE-T, SFP 1000BASE-X, install it now, and following the instructions
below.
To rack-mount devices:
1. Attach the brackets to the device using the screws provided in the Bracket Mounting Kit.
Figure 4-1. Attaching the Brackets
2.
Mount the device in the rack, using four rack-mounting screws.
11