NetComm NCT240 - Manual (Page 34)

NetComm NCT240 Installation Guide Release 1.0
‹ ANSI T1.413 Issue 2
‹ Line loop back and diagnostic
Software Feature
L2/L3 Functionality
‹ Switch capability: IEEE802.3x flow control, IEEE802.1d bridging.
‹ VLAN: IEEE802.1p/q VLAN (4094), stacked VLAN, Port-based and Tag-based.
‹ Multicasting: IGMP snooping, 250 groups, Dynamic&Static Configuration.
‹ QoS: IEEE802.1p based COS, 4 priority output queue per port, RFC 2475
DiffServ/TOS.
‹ DHCP: DHCP relay and relay agent option 82.
‹ Rate Limitation: from 64K to Maximum rate, the step is 64K.
Interworking
‹ RFC2684 MPoA LLC/VCMUX.
‹ VPN pass-through
‹ RFC2516 PPPoE packet forwarding.
Trouble Shooting
‹ LED indicator for power, varied interfaces and system alarms.
‹ Local and remote management by using serial and uplink interface
¾ On-line show link status monitor, quality and traffic counters
¾ Loop back test
¾ Log event/alarm of system level
¾ Log event/alarm of GE and ADSL2+ interfaces
‹ Cable labeling
Management
‹ CLI support for local management
‹ SNMP V1/V2c
‹ Telnet/SSH
‹ Web-based
‹ Support FCAPS management for EMS
‹ Syslog
‹ SNTP
‹ Remote software upgrade
‹ Remote file backup and restore
34