NETGEAR ADSL MODEM WIRELESS DG834G User Manual
Page 122
Reference Manual for the ADSL Modem Wireless Router DG834G
8-14
Virtual Private Networking
v1.2, October 2006
h. Select the Connect using Secure Gateway Tunnel check box.
i.
Select IP Address in the ID Type menu below the check box.
j.
Enter the public WAN IP Address of the DG834G v3 in the field directly below the ID
Type menu. In this example,
22.23.24.25
would be used.
k. The resulting Connection Settings are shown in
3. Configure the Security Policy in the NETGEAR ProSafe VPN Client software:
a. In the Network Security Policy list, expand the new connection by double clicking its
name or clicking on the “+” symbol. My Identity and Security Policy subheadings appear
below the connection name.
b. Click on the Security Policy subheading to show the Security Policy menu.
c.
Select the Main Mode in the Select Phase 1 Negotiation Mode check-box group.
4. Configure the VPN Client Identity.
In this step, you will provide information about the remote VPN client PC. You will need to
provide the Pre-Shared Key that you configured in the DG834G v3 and either a fixed IP
address or a “fixed virtual” IP address of the VPN client PC.
Figure 8-10