NETGEAR ADSL MODEM WIRELESS DG834G - Manual (Page 28)

Reference Manual for the ADSL Modem Wireless Router DG834G
3-4 Configuring Your Internet Connection
v1.2, October 2006
Manually Setting Up Your Modem Router
There are four steps to setting up your modem router:
1. Install ADSL filters on the phone lines.
2. Connect the firewall to the ADSL line.
3. Log in to the firewall.
4. Connect to the Internet.
Follow the steps below to connect your firewall to your network. Before you begin, locate the
ADSL configuration information from your Internet Service Provider (ISP).
1. Connect the ADSL filter.
a. You need to install an ADSL filter for every telephone that uses the same phone line as
your modem router. Select the filter that came with your modem router.
Note: If you purchased the DG834G v3 in a country where an ADSL filter is not
included, you must acquire one.
1. One-Line Filter: Use with a phone or fax machine.
2. Splitter: Use with a one-line filter to share an outlet with a phone and the modem router.
3. Two-Line Filter with Splitter: Use to share an outlet with a phone and the modem router.
Figure 3-3
Phone
Phone
DSL
Lin
e
1
2
3