NETGEAR ADSL MODEM WIRELESS DG834G - Manual (Page 23)

Reference Manual for the ADSL Modem Wireless Router DG834G
Introduction 2-7
v1.2, October 2006
The Router’s Front Panel
The front panel shown below contains status LEDs.
You can use the LEDs to verify various conditions. Table 2-1 describes each LED.
Figure 2-1
Table 2-1. LED Descriptions
Label Activity Description
1. Power
On
Off Power is supplied to the router.
Power is not supplied to the router.
2. Test
On
Off The system is initializing.
The system is ready and running.
3. Internet
Blink -- Amber
On -- Green
Blink -- Green Indicates ADSL training.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
4. Wireless
On
Off Indicates that the Wireless port is initialized.
The Wireless Access Point is turned off.
5. LAN
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off The Local port has detected a link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected a link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.