NETGEAR ADSL MODEM WIRELESS DG834G User Manual

Page 49

Advertising
background image

Reference Manual for the ADSL Modem Wireless Router DG834G

Wireless Configuration

4-5

v1.2, October 2006

The following parameters are in the Wireless Settings menu:

Wireless Network.

Name (SSID). The Service Set ID, also known as the wireless network name. Enter a

value of up to 32 alphanumeric characters. The same Name (SSID) must be assigned to all
wireless devices in your network. The default SSID is NETGEAR, but NETGEAR
strongly recommends that you change your network Name to a different value.

Region. Select your country/region from the drop-down list. This field displays the region

of operation for which the wireless interface is intended.

Channel. This field determines which operating frequency will be used. It should not be

necessary to change the wireless channel unless you notice interference problems with
another nearby access point.

Mode. The default is "g & b", which allows both "g" and "b" wireless stations to access

this device. “g only” allows only 802.11g wireless stations to be used. “b only” allows
802.11b wireless stations; 802.11g wireless stations can still be used if they can operate in
802.11b mode.

Wireless Access Point.

Enable Wireless Access Point. This field lets you turn off or turn on the wireless access

point built in to the modem router. The wireless icon on the front of the modem router will
also display the current status of the Wireless Access Point to let you know if it is disabled
or enabled. The wireless access point must be enabled to allow wireless stations to access
the Internet.

Allow Broadcast of Name (SSID). If enabled, the SSID is broadcast to all Wireless

Stations. Stations which have no SSID (or a "null" value) can then adopt the correct SSID
for connections to this Access Point.

Note: This value is case sensitive. For example, Wireless is not the same as

wireless.

Note: In the USA, the Region is preset according to regulatory requirements and

cannot be changed. In other areas, you can and must set the Region. It may
not be legal to operate the wireless access point in a region other than one
of those identified in this field.

Advertising