Assembly and initial set-up, Step 1. unpacking & delivery inspection – North Star M157594I User Manual
Page 11
Assembly and Initial Set-Up
11
Steps for Assembly / Initial Set-Up
Step 1. Unpacking & Delivery Inspection
Step 2. Trailer Assembly
Step 3. Initial Pump & Engine Preparation
Step 4. Battery Installation
Each of these steps is discussed in the below:
Step 1. Unpacking & Delivery Inspection
Find and separate the components identified in Figure 2 – Overview of Pressure Washer
Components and Figure 3 – Hardware Bag. Inspect the pressure washer immediately after you
receive delivery for missing parts and damage.
If you have missing components, contact Product Support at 1-800-270-0810.
If you have damaged components, contact the freight company that delivered the unit and file
a claim.
Figure 2 – Overview of Pressure Washer Components
Crated Pressure Washer
Qty-1
Coupler
Qty-1
Safety Chains
Qty-2
Jack
Qty-1
Caster Wheel
Qty-1
Truck Chest
Qty-1
Manual Bag
Qty-1
Spray Gun &
Lance
Qty-1
High Pressure Hose
Qty-1
Jack Plate
Qty-1