Assembly and initial set-up – North Star M157594I User Manual
Page 14
Assembly and Initial Set-Up
14
Step 2. Trailer Assembly (continued)
14.) Attach coupler to a-frame with two
1/2x4" bolts and Class G lock nuts.
Tighten each bolt to 90ft.-lbs. Use a
torque wrench.
15.) Attach safety cables to the a-frame with
1/2" x 5" bolt and Class G lock nut.
Place a flat washer next to the head of
the bolt, slide the bolt through the cable
and the A-frame. Then slide the other
cable onto the bolt, followed by another
washer then the lock nut. Tighten to
37ft.-lbs.
16.)
Attach truck chest to A-frame with four
5/16 x 1" bolts, lock nuts, and washers.
Place a flat washer onto the bolt, then
insert bolts down though holes in truck
chest and A-frame. Place washers under
wall of a-frame and fasten with lock nuts.
Tighten each bolt to 20ft.-lbs.
Truck chest
Coupler
Safety Cables
1/2" x 5" Bolt
Tow Bar
Tube
Safety Cable
Flat Washer
Class G Lock Nut
Flat Washer
Safety Cable
5/16" x1" bolt
Truck chest
A-frame
Lock Nut
Flat Washer
Flat Washer