Numark Industries HDCD1 - Manual (Page 22)

Numark HDCD1 - 22 – User’s Guide
DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS
PLAY & CUE
Pressing the PLAY/PAUSE button starts the song. Pressing the CUE button will reset the song to the last
place where the song was started. This is called the cue point. By alternately pressing the PLAY/PAUSE
button and the CUE button, the song may be returned and played from the cue point any number of times.
This function is called back cue.
PLAY, PAUSE & CUE
When the disc is paused and the PLAY/PAUSE button is pressed again to resume play the return position
for back cue will be updated as a new cue point.
EDITING THE CUE POINT
To fine tune the cue point, use the jog wheel. If the jog wheel is turned while a song is cued, a new cue
point will be defined. You must press PLAY, then CUE before this operation can be performed. The
HDCD1 will repeatedly play small parts of the song as you turn the wheel to move to the desired position
in the song. Then by pressing PLAY/PAUSE, then CUE you will establish the new cue point location.