Looping operations, Numark hdcd1 - 23 – user’s guide – Numark Industries HDCD1 User Manual

Page 23

Advertising
background image

Numark HDCD1

- 23 –

User’s Guide

LOOPING OPERATIONS


LOOPING:
A loop is any area of a song that you choose to repeat with no breaks.

LOOP IN: The LOOP IN point is where you wish the

loop to start. The initial cue point of the song is also the
default LOOP IN point. If you wish to set a new LOOP IN

point, just press

while the CD is playing when it

reaches the desired point. The

button will light

indicating a LOOP IN point has been set. By default the

LOOP IN point also becomes a “STUTTER” or “HOT
START” point that can be triggered by pressing the

RELOOP button.


NOTE: The unit will always remember a new set point as the “LOOP IN” or “HOT START”

point until you actually set a new “LOOP IN” point or put in a new song.

LOOP OUT: The LOOP OUT point determines the end of the loop. The first time you press

while a

song is in play mode, the LOOP OUT button will light and the song will return to the LOOP IN point with no
break and continue to play. When the song reaches the LOOP OUT point again it will return to the LOOP IN

point and continue to repeat this action. The LOOP IN button will also be blinking during loop play. To

release or end the LOOP press LOOP OUT a second time. Play will continue forward when the song passes the
previously set LOOP OUT point. The LOOP OUT button will be lit indicating that the loop is now in memory and

can be reactivated by using the RELOOP button.

Note: The LOOP OUT point will be erased if LOOP IN is pressed or a new cue point is set after the LOOP

OUT point. This is important because without this point, the “RELOOP” feature will not work.

MOVING LOOP POINTS: The LOOP IN

point can be moved while the music

is playing just by pressing

at

the new desired point. The next
time the LOOP OUT point is reached,

the CD will return to this new LOOP

IN point. If LOOP IN is pressed after
the LOOP OUT point it will clear the

LOOP OUT point.

The LOOP OUT point can also be moved while a loop is playing. Press

to release the old LOOP OUT point

and press it again at the new desired LOOP OUT point.

Advertising