9 broken_select, 10 busy_fail, 11 character_set – Nordic Star Products 4.3A User Manual
Page 45: 12 class, 13 code_end, 14 code_start, 15 company
Keyword reference
XFAX - User’s Guide 4.3a
45
15.1.9 BROKEN_SELECT
BROKEN_SELECT
This indicates that XFAX should be run on SCO Xenix.
15.1.10 BUSY_FAIL
BUSY_FAIL=number of retries
Gives the maximum number of retries when engaged. Normally engaged is not
counted as a failed attempt, but with the help of this keyword it is possible to get
round this.
15.1.11 CHARACTER_SET
CHARACTER_SET=characterset
Gives the set of characters that should be used. See the command faxsend for
possible options.
Standard value: 5 (Swedish 7 bit mapping)
15.1.12 CLASS
CLASS=string
By default faxmaster tries to determine if it is a Class 2 or Class 2.0 device. By
using CLASS=2 or CLASS=2.0 you can avoid that. It makes the initialisation a
little bit quicker.
15.1.13 CODE_END
CODE_END=string
Gives the character sequence to mark the end of a document code.
Standard value: “]]”
15.1.14 CODE_START
CODE_START=string
Gives the character sequence to mark the start of a document code.
Standard value: “[[“
15.1.15 COMPANY
COMPANY=string
This gives the company name which will appear on the cover sheet when send-
ing by means of the script xfax.