Nordic Star Products 4.3A - Manual (Page 47)

Keyword reference
XFAX - User’s Guide 4.3a 47
Indicates how long after an attempt is made to make a connection the attempt
should be discontinued if the connection is not established.
15.1.23 DOMAIN
DOMAIN=domain
Specifies the domain name to use when sending e-mail.
15.1.24 EXEC_WORKDIR
EXEC_WORKDIR=directory
Indicates which directory should be used as a working directory when a program
given by EXECUTE_AFTER_REC and EXECUTE_AFTER_SEND is exe-
cuted.
15.1.25 EXECUTE_AFTER_RECEIVE
EXECUTE_AFTER_RECEIVE=program
Gives a program which is executed after receiving a fax.
The program is executed with the following arguments in the sequence given:
ID ID of fax
Result code Result code from the reception.
15.1.26 EXECUTE_AFTER_SEND
EXECUTE_AFTER_SEND=program
Gives a program which is executed when a fax is concluded, i.e. has been sent or
not been able to be sent.
The program is executed with the following arguments in the sequence given:
ID The ID of the fax
Fax number The recipient’s fax number
Result code Can be any of the following values: 0 (OK), 1 (Con-
nect), 2 (Ring), 3 (No carrier), 4 (Error), 6 (No dial-
tone), 7 (Busy), 8 (No answer), 19 (No line), 20 (Inter-
rupted) or any of the result codes the modem uses in
fax mode (see the description of faxq in the chapter:
“Handling faxes”, for a more detailed description).
No of retries The number of attempts to send the fax.
Notes Any notes which are attached to the fax. This is added
with the parameter -n to faxsend.
Conn. time The number of seconds connected during the transmis-
sion attempt. This is not exact, but a good estimate.
Concl. time The time when the fax is concluded, i.e. sent or an
attempt has been made for the last time.