Nordic Star Products 4.3A - Manual (Page 48)

Keyword reference
XFAX - User’s Guide 4.3a 48
User The user who placed the fax in the queue.
15.1.27 EXECUTE_BEFORE_SEND
EXECUTE_BEFORE_SEND=program
Gives a program which is executed before a fax is placed in queue.
The program is executed with the following arguments in the sequence given:
ID The ID of the fax
Fax number The recipient’s fax number
Result code Not used.
No of retries Not used.
Notes Any notes which are tied to the fax. This is addedwith
the parameter -n to faxsend.
Conn. time Not used.
Concl. time Not used.
User The user who placed the fax in the queue.
15.1.28 EXIT_STRING
EXIT_STRING=“string”
Gives a command string which is sent to the modem after the call is finished.
Note that ATZ (reset) is always sent to the modem before the given string is sent.
15.1.29 FAIL_DIR
FAIL_DIR=directory
The directory in which to place unsuccessful faxes. If NO_ERROR_SAVE is not
defined an unsuccessful fax will end up under $HOME/Fax, but with this key-
word this directory can be freely selected.
15.1.30 FAIL_FAXNO
FAIL_FAXNO=fax number
The fax number to send faxes which have not reached their destination. Can be
used to get faxes which it is not possible to send to be sent to your own fax.
15.1.31 FAXHOST
FAXHOST=string
Used when XFAX is run in a network and indicates which machine should be
used as a server.
The name can be a machine name or an IP address.