Nordic Star Products 4.3A - Manual (Page 55)

Keyword reference
XFAX - User’s Guide 4.3a 55
Normally the communication speed between the computer and the modem is
19.200 bps. By using this keyword that can be changed. Not any value can be
used. Possible values: 2400, 4800, 9600, 19200, 38400. Standard value: 19200
15.1.73 SEND_ONLY
SEND_ONLY
Indicates that fax lines should be used only for sending or only for receiving.
This function is also controlled by the scope of your license agreement. If the fax
modem is used for incoming modem traffic and outgoing fax traffic
SEND_ONLY must be given, otherwise the fax server will try to answer and
receive incoming calls as a fax.
15.1.74 SMTP_ENABLE
SMTP_ENABLE
Specifies that the XFAX SMTP server should be enabled.
See also: SMTP_PORT, USER_FILE, ACCESS_SMTP
15.1.75 SMTP_PORT
SMTP_PORT=port
Specifies which port to be used by the SMTP server.
Standard value: 7180
15.1.76 SMTP_SENDER
SMTP_SENDER=”string”
Specifies a sender for e-mails that XFAX generate.
15.1.77 SMTP_SERVER
SMTP_SERVER=hostname
Indicates which SMTP server to use for sending e-mail.
15.1.78 SPOOLDIR
SPOOLDIR=directory
Indicates which directory should be used to store data and control files.Standard
value: /usr/spool/fax
15.1.79 STTY
STTY=string
Gives a stty string that should be sent to the port after it has been opened. Can be
used to set special parameters. However it need not normally be used.