Nighthawk SILVER STRIKE BOWLING - Manual (Page 8)

Silver Strike Bowling™ Version 08/04 Page 6
© Copyright 2004 Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
Recommended Tools
Have the following tools ready before you begin to install this kit:
q ¼" Nut Driver
q 7/16" Socket or Driver
q 11/32" Socket
q Phillips Head #2 Screw Driver
q 9/32" Drill OR 5/16" and ¾" Drill Bits
q 1 1/8" Hole Saw or Drill Bit
q Small Flat Blade Screwdriver
q Jig/Sabre Saw
q Router
q Push Button Nut Socket or Large Adjustable Pliers
q X-acto® Knife or other Sharp Knife/Razor Blade
q Wire Cutters
q Scissors
q Tape Measure
q Putty Knife
q Decal Roller/Squeegee
q Liquid Window Cleaner & Cleaning Cloth
q Vacuum Cleaner
q Any tools needed to remove parts from your existing cabinet not listed above.
Many operators notice their earnings increase with touches as simple as a fresh coat of paint and a clean cabinet.
If you will be painting, you'll need these supplies:
q Air Brush or Paint Sprayer,
q Paint Brush, Paint Roller, and Pan
q Paint (and Primer) --We recommend black as a cabinet color choice.
q Sandpaper
Installation Preparation
BEFORE YOU START…
Before you install the Silver Strike Bowling kit into your cabinet there are a few things you should check first:
1. Check to make sure your existing cabinet's monitor, speakers, AC power cord, and lights work.
q Replace or repair where necessary.
2. Check to make sure all the necessary parts are included in your kit.
q If any are missing/damaged please contact IT's Technical Support at 847-870-7027 x121.
3. Check to make sure cabinet is wired with standard earth grounded A.C. plug compatible with local
building codes and/or safety requirements.
q If not, have a qualified electrician install one (not provided).
4. Have all the necessary tools available to install this kit.
q Refer to the recommended tools list above to make sure you are prepared before you start.
5. Make sure any parts of the system (lights, monitor, etc.) are not plugged in.
q Working with any part of the system plugged in or powered on can be dangerous.
6. Keep in mind that it's been proven that the higher quality of work put into a kit installation results in a
higher earning game.
q Make sure you have plenty of space, time, and focus to put into this kit installation.