Nortel Networks MOG6xx - Manual (Page 102)

102
Appendix B: WLAN Application Gateway 2246
Wireless handset certification
WLAN Application Gateway 2246 installation on new system
If this is a new system installation, continue with WLAN Handset 2210/2211 registration and Call
Server programming. When the wireless handset installation is complete, perform the usual voice
and coverage tests.
WLAN Application Gateway 2246 installation on existing system
Follow the steps to certify the wireless handsets on an existing system.
Certifying the wireless handsets on an existing system
1 Place a test call.
2 Test the features on each WLAN Handset 2210/2211 to ensure the system is working properly.
3 Test the application on each WLAN Handset 2210/2211.
4 Consult the application provider for specific test procedures.
Updating software
The WLAN Application Gateway 2246 and the WLAN Handsets 2210/2211 use proprietary
software programs. The software versions that are running on the system components can be
displayed through the System Status screen.
Nortel Networks provides information about software updates, and how to obtain the software
(for example, downloading from the Nortel Networks web site).
Software updates on MOG700 systems
After software updates are obtained from Nortel Networks, they must be transferred to the
appropriate location in the LAN. This enables the corresponding system components to access and
update their software. The FTP (File Transfer Protocol) method of transfer is used.
In the WLAN Application Gateway 2246, the flash file system has the following files shown in
Table 11 :
Table 11 Software files
File name Description
config.bin OAI box configuration
fnctla.bin functional code
oaiptlst.bin phone list configuration
oaipttlsb.bin redundant phone list configuration