Figure 23, Netlink oai system screen with added options – Nortel Networks MOG6xx User Manual
Page 92
92
Appendix B: WLAN Application Gateway 2246
The Telnet method of connection is used for routine maintenance of the system for both local and
remote administration, depending on the network.
Follow the steps to connect to a WLAN Application Gateway 2246 through Telnet.
Connecting to a WLAN Application Gateway 2246 through Telnet:
1
Run a Telnet session to the IP address of the WLAN Application Gateway 2246.
2
Log in to the WLAN Application Gateway 2246.
The NetLink OAI System screen appears.
Note: Since the WLAN Application Gateway 2246 has been initially configured, the NetLink
OAI System screen now has some different options displayed.
When the configuration procedure is complete, the NetLink OAI System screen adds a Feature
Programming option. Also, the OAI Line Configuration option is replaced by a Telephone Line
Configuration option. See
Figure 23 NetLink OAI System screen with added options