NordicTrack NTB58030 - Manual (Page 10)

10
15. Press two 48mm Round Inner Caps (23) into two
Storage Tubes (12). Screw the Storage Tubes
onto the Left Rear Upright (4). Make sure the
Storage Tubes are fully tightened.
Repeat this step with the other two Storage
Tubes (12) and the Right Rear Upright (not
shown).
16. Press two 32mm Round Inner Caps (25) into the
end of the Left Weight Rest (19) and the Left
Safety Spotter (17).
Insert the Left Weight Rest (19) and the Left
Safety Spotter (17) into holes in the left Front
Upright (6) and engage the locking pins around
the Upright.
Repeat this step with the Right Weight Rest
(not shown), the Right Safety Spotter (not
shown), and the right Front Upright (not
shown).
15
16
23
23
12
12
25
19
17
4
25
6
17. Wet the ends of the Lat Bar (43) and the Row Bar
(47) with soapy water. Slide four Handgrips (44)
onto the ends of the two Bars.
18. Make sure that all parts are properly tightened
before you use the weight rack. The use of all
remaining parts will be explained in ADJUST-
MENTS starting on the next page.
17
43
47
44
44
44
44