NordicTrack NTB58030 User Manual
Page 6
6
3.
Press a 60mm Square Inner Cap (22) into the Lat
Tower (8).
Orient the Weight Carriage (10) as shown and
slide it onto the Lat Tower (8). Orient the Carriage
Stop (21) as shown and slide it onto the Lat
Tower below the Weight Carriage.
Slide the Lat Tower (8) onto the Lat Tower Base
(3). Attach the Carriage Stop (21) at the indicated
hole with an M10 x 86mm Bolt (35) and an M10
Nylon Locknut (32).
attach the Lat Tower (8) to the Lat Tower Base (3)
with three M10 x 72mm Bolts (39), three M10
Washers (33), and three M10 Nylon Locknuts
(32). Do not tighten the Locknuts yet.
3
8
Attach the
Carriage Stop
(52) here.
32
32
32
3
39
39
33
10
35
21
22
4.
Attach the Top Crossbar (9) to the Left Rear
Upright (4) with two M10 x 94mm Bolts (34), two
M10 Washers (33), and two M10 Nylon Locknuts
(32). Do not tighten the Locknuts yet.
Attach the Top Crossbar (9) to the Right Rear
Upright (not shown) in the same manner.
4
32
33
34
34
9
4