NordicTrack NTSY59210 User Manual

Page 21

Advertising
background image

21

54 Attach the Backrest (47) to the Backrest Bracket

(15) with three M8 x 16mm Bolts (84).

55. Attach the Backrest Bracket (15) to the Backrest

Frame (14) with an M10 x 80mm Bolt (92) and an
M10 Nylon Locknut (93).

56. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in

ADJUSTMENTS, beginning on the following page.

Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over
the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE
DIAGRAMS on pages 26 and 27 for proper cable routing. If there is any slack in the cables, you will
need to remove it by tightening the cables; see TROUBLESHOOTING AND MAINTENANCE on page
25.

55

54

84

15

47

15

92

14

93

Advertising