NordicTrack NTSY59210 User Manual
Page 7
7
4.
Attach the Press Upright (16) to the indicated two
M10 x 67mm Carriage Bolts (87) in the Press
Base (1) with two M10 Nylon Locknuts (93). Do
not tighten the Locknuts yet.
4
93
1
16
93
87
6.
Press two Large Support Rod Bushings (66) into
the Press Top Frame (13). Press two 50mm x
75mm Inner Caps (68) into the ends of the Press
Top Frame. Press the two Rod Covers (41) onto
the indicated rod. Slide the two Barbell Hook
Sleeves (42) onto the barbell hooks.
Attach the Press Top Frame (13) to the Press
Upright (16) and the Right Upright (17) with four
M10 x 95mm Bolts (80), four M10 Washers (89),
and four M10 Nylon Locknuts (93). Do not tight-
en the Locknuts yet.
5.
Attach the Seat Frame (3) to the indicated two
M10 x 67mm Carriage Bolts (87) in the Press
Base (1) with two M10 Nylon Locknuts (93).
Attach the Seat Frame (3) to the Press Upright
(16) with two M10 x 95mm Bolts (80), M10
Washers (89), and two M10 Nylon Locknuts (93).
Do not tighten the M10 Nylon Locknuts (93)
yet.
5
6
87
1
16
93
3
93
80
80
93
89
80
89
89
68
13
41
41
Rod
Barbell
Hook
42
42
68
93
93
17
16
66