Netac Tech T600 - Manual (Page 10)

Netac AirTrack T600 Mini Wireless Router
5
3 Operating Mode Overview
This section provides an overview of T600 operating modes.
NOTE: The AirTrack T610 Wireless Broadband Router in the following pictures is router product of Netac.
You can choose the product of the same kind from the other companies to build net.
3.1 AP Router Mode
The default operating mode is AP Router Mode. When the system is restored to the default factory settings,
the operating mode also reverts to AP Router Mode. In AP Router Mode, T600 works as a standard AP,
where wireless clients connected to the AP can then connect to other wireless clients or to the wired network.
For example, when traveling to a hotel that has high-speed Internet access, or at home, the user can connect
to the Internet through the AP, which is connected to an Ethernet cable in the room (Figure 3.1).
Family's AP Router Mode
Traveler's AP Router Mode
Figure 3.1 AP Router Mode
T600 AP can act as a DHCP server, support IP address conversion.
Section 5.1 "AP Router Mode Setup Page" describes the configuration details for this mode.