5 mode selection page, 1 ap router mode setup page – Netac Tech T600 User Manual

Page 16

Advertising
background image

Netac AirTrack T600 Mini Wireless Router

11

5 Mode Selection Page

The first step in using T600 is selecting the operating mode. The default operating mode is AP Router Mode.

To view the web page for the device, open a web browser and enter "192.168.1.1" (default IP address of the

device) on the address bar. The default username is "admin" and the default password is "password".

Figure 5.1 shows the page displayed after logged on.

Figure 5.1 Mode Selection Page

To select a mode, click the Mode tab. Click the radio button next to the desired mode and click the Apply

button. The device will reboot in the selected mode. After rebooted, click the Setup button to begin

configuring the device.

The What's This? button opens a popup window with a brief description for each mode.

5.1 AP Router Mode Setup Page

To configure T600 in AP Router Mode, select AP Router in the Mode Selection Page (Figure 5.1), click Apply

Advertising