Netac Tech T600 - Manual (Page 25)

Netac AirTrack T600 Mini Wireless Router
20
The Repeater Mode Access Filter page is identical to the one for AP Router Mode. Refer to Figure 5.6, "AP
Router Mode - Access Filter Page" for the details. Table 5.10 details the options.
Table 5.10 Repeater Mode - Access Filter Settings
Field Description
MAC Filtering Enable/Disable MAC filtering mode.
Filter Mode Allow or deny clients listed in MAC address to access repeater.
Filter List Up to 32 MAC addresses can be listed.
MAC address List of MAC addresses to filter.
5.3 P2P Mode Setup Page
To configure T600 in P2P Mode, select P2P in the Mode Selection page (Figure 5.1), click Apply to reboot
T600, and then click the P2P: Setup button. Figure 5.9 and Table 5.11 describe the P2P Mode setup options.
Figure 5.9 P2P Mode Setup Page
Table 5.11 P2P Mode Setup Options