Netac Tech T600 - Manual (Page 32)

Netac AirTrack T600 Mini Wireless Router
27
Join
Select a wireless network, and then click the Join button to connect the client
bridge with the selected AP/node or Ad-Hoc network.
Close Close the Site Survey page.
5.5.2 Client Mode - Security Configuration
To enable security, select the desired security mode (WEP or WPA) in the Client Mode setup page (Figure
5.13) and click the Setup button to enter the configure page.
5.5.2.1 WEP Configuration Page
Figure 5.15 and Table 5.19 detail the WEP configuration page for Client Mode.
Figure 5.15 Client Mode - WEP Configuration Page
Table 5.19 Client Mode - WEP Configuration
Field Description
Authentication Type Select Open or Shared Key.
WEP Length Select WEP key length: 64 bits or 128 bits.
Mode Select WEP key format: Hexadecimal or ASCII.
Passphrase
Passphrase is used to generate the WEP keys. Click the Generate button to
generate the keys. Click the Clear button to clear the Passphrase field.
Key 1-4 WEP keys.
Default TX key Select default WEP key from Key1-4.