Netac Tech T600 - Manual (Page 22)

Netac AirTrack T600 Mini Wireless Router
17
Figure 5.7 Repeater Mode Setup Page
Table 5.6 Repeater Mode Setup Options
Field Description
Parent MAC Address MAC address of Parent AP/Router/Repeater to which this Repeater is connected.
Child MAC Address MAC address of the Child Repeater connected to this Repeater.
Mode Select 802.11b, 802.11g or Mixed mode.
Broadcast SSID Disable/Enable the SSID broadcast feature.
Domain Select domain. Different domain use different channel.
Channel Select the RF channel. Default: Channel 6.
Security
Select Disable (Default), WEP or WPA. Select one, and click the Setup button to
enter the WEP configuration page (Figure 5.3) or WPA (Figure 5.4).
Advanced Settings Click Setup to configure Advanced Settings (Figure 5.8).
Access Filter Click Setup to configure the Access Filter (Figure 5.6).
NOTE: Under Repeater Mode, you must make sure the related configuration (such as Security, Channel, etc.)
of Parent AP and Child AP/Router are consistent with T600 in order to communicate with each other.