NetComm HS1100 - Manual (Page 106)

HS1100 Wireless Hotspot Gateway User Manual
105
y Enhance User Authentication: If enabled, only the users with their MAC addresses in this list can log into
HS1100. However, user authentication is still required for these users. To specify the MAC addresses, click the
hyperlink of Permit MAC Address List to enter the “MAC Address Control” page and fill in the MAC
addresses. Select Enable and then click Apply.
The format of the MAC address is: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
y SMTP Redirect: If enabled, please configure IP address of SMTP server and the port number of the SMTP
server here.