NetComm HS1100 - Manual (Page 53)

HS1100 Wireless Hotspot Gateway User Manual
52
Ø
802.1X Authentication: Enable this function and the hyperlink of Radius Client List will appear. Click the
hyperlink of Radius Client List to get into the RADIUS Client Configuration list for further configuration. In the
Radius Client Configuration table, depending on the Type to be selected (either Roaming Out or 802.1x), the
client’s IP address will be either another NAC’s IP address (Roaming Out) or wireless AP/802.1x switch’s IP
addess (802.1x). The system will handle the authentication request from these clients accordingly.
Authentication Method – POP3
Choose “POP3” from the Authentication Method field, the hyperlink beside the pull-down menu will become
“POP3 Setting”.
Click the hyperlink of POP3 Setting for further configuration. Enter the information for the primary server and/or the
secondary server (the secondary server is not required). The fields with red asterisk are necessary information.