NetComm HS1100 - Manual (Page 7)

HS1100 Wireless Hotspot Gateway User Manual
6
Panel Function Descriptions
Front Panel
Rear Panel
y DC IN: The power adaptor plugs here.
y RESET: Press this button to restart/reboot the system (NOT reset back to factory default).
y WAN: The WAN port is used to connect to a network which is not managed by HS1100, and this port can be
used to connect an xDSL/cable modem, or a switch/hub on a LAN of a company/organization.
y LAN1/LAN2: These two default authentication-demanding Public LAN ports are connected to the managed
network or WLAN. They may be configured as authentication-demanding Public LAN or authentication-free
Private LAN ports.
y LAN3/LAN4: These two default authentication-free Private LAN ports are connected to a trustful network, where
the users can always access network resources without authentication. These ports may be connected to an
external server such as a File Server or Database Server.
y Console: The system can be configured via HyperTerminal. For example, if you need to set the Administrator’s
Password, you can connect a PC to this port as a Console Serial Port via a terminal connection program (such
as the super terminal with the parameters of 9600, 8, N, 1, None flow control) to change the Administrator’s
Password.