NetComm HS1100 - Manual (Page 108)

HS1100 Wireless Hotspot Gateway User Manual
107
Network Address Translation
Set the configuration for Static Assignments, Public Accessible Server and Port and Redirect.
y Static Assignments
The administrator can define mandatory external to internal IP mapping, so that a client on HS1100’s WAN can
access the managed machine (e.g. a PC, a system) on HS1100’s LAN by accessing the external IP. There are
40 sets of static Internal IP Address and External IP Address available. Enter Internal and External IP
Addresses as a set. After the setup, accessing the WAN will be mapped to access the Internal IP Address.
These settings will become effective immediately after clicking the Apply button.
y Public Accessible Server
This function allows the administrator to set 40 virtual servers at most, so that client devices outside the
managed network can access these servers within the managed network. Different virtual servers can be
configured for different sets of physical services, such as TCP and UDP services in general. Enter the “External
Service Port”, “Local Server IP Address” and “Local Server Port”. Select “TCP” or “UDP” for the service’s
type. In the Enable column, check the desired server to enable. These settings will become effective
immediately after clicking the Apply button.