Figure 2. mounting the fp-1600 onto a din rail – National Instruments FIELDPOINT FP-1600 User Manual
Page 3
Advertising
© National Instruments Corp.
3
FP-1600
Figure 2. Mounting the FP-1600 onto a DIN Rail
b. Slide the FP-1600 to the desired position along the
DIN rail.
c.
Lock the FP-1600 to the DIN rail by pushing the rail
clip to the locked position.
•
Installing onto a panel mount accessory, which you can
order separately from National Instruments:
a.
Snap the panel mount accessory onto the module,
as shown in Figure 3.
Figure 3. Mounting the FP-1600 onto a Panel Mount Accessory
Cover
Press
35 mm DIN Rail
Lip
Local Bus
Connector
Press
Advertising