National Instruments FIELDPOINT FP-1600 - Manual (Page 7)

© National Instruments Corp. 7 FP-1600
Figure 7. FP-1600 Power Connector Pinout
Connect the primary power supply to the center V and C pair.
You can connect an optional backup power supply to the left V
and C pair. The right V and C pair provides a convenient means
of connecting power to the V and C terminals of a terminal base.
Figure 7 shows this optional connection.
Specifications
Network interface ............................. 10BaseT and 100BaseTX
Ethernet
Compatibility .................................... IEEE 802.3
Communications rate ........................ 10 Mbps, 100 Mbps,
autonegotiated
Cabling distance................................ 100 m
Power supply range........................... 11 to 30 VDC
Power consumption........................... 7 W + 1.15 *
∑
(I/O module
power requirements )
Maximum terminal bases per bank... 9
Maximum number of banks.............. determined by network
topology
Operating temperature ...................... –40 to +55 °C
Storage temperature .......................... –55 to +85 °C
Relative humidity.............................. 5% to 90% non-condensing
Weight............................................... 250 g (8.7 oz.)
v
v
v
c c
c
11-30 VDC
Backup Power
Supply
(optional)
+
–
+
–
11-30 VDC
Primary Power
Supply
V
C
To adjacent device
(optional connection)